Last Updated on September 13, 2023

Spring is a crucial part of the trampoline to make proper bounce. Either you go for trampoline installation, repair, or removal- springs attachment or detachment is necessary. Springs are prone to rust or stretch over time thus lessening their bouncing power. So, spring replacement is necessary. Thus, every trampoline enthusiast should learn how to replace the springs and what types of tools you need to do that.

The right tools like trampoline spring tools and trampoline spring tool alternatives are effective ways to complete the task. But you have to know first when to replace the springs. In this article, we’re going to teach you spring replacement processes in detail.

Why Spring Replacement Is Necessary

Before moving to the replacements, make sure spring replacement is truly necessary. There are several signs of spring that will tell you whether you replace the springs or not. Replace springs if-

• One or several springs are broken
• Springs are overstretched
• Heavy-rust forms in spring
• Bounce isn’t up to the mark

How To Measure Trampoline Springs

After confirming how many springs need to be replaced, the next step is to know the correct size of the spring. The best and easiest way is to know the actual spring length by checking your trampoline guidebook and getting the right measurement. If you’ve lost the manufacturer guidebook, you can also search on the web with your trampoline model number. Alternatively, you can contact the manufacturer.

But if you want to measure the springs by yourself, follow the steps below to do it in the right way.

• Remove several (at least 3) existing springs from the trampoline. Be sure, the springs are in good health. You can use pliers, wrench, spring pullers, etc, for spring removal. For hand protection, you can use hand gloves.
• Put the springs on a flat surface and measure their length from one hook end to another end using a tape measure, ruler, or slide caliper. Note down the values in the inch or centimeter unit. You can also measure the diameter too but it’s optional.
• Now calculate the average length of the springs. This value is the most approximate length of the spring.

Trampoline Spring Tool Alternatives and Spring Replacement

If you want to replace the springs, the spring tool or alternative tools are a must. Some of the prominent spring replacement tools are discussed below.

Trampoline Spring Tool

This is the most common and professional tool used for trampoline spring replacement. It is designed for inserting, adjusting, or removing the spring from the trampoline. The tool comes in various sizes, shapes, and types. Most trampoline manufacturers include it with new trampolines but you can also buy it separately.

The Spring puller has two ends- one for hand grip and another for pulling the springs. The pulling end is perpendicular to the body of the spring puller. This tool looks like T so it is sometimes called T-hook or trampoline spring pulling hook. Some trampoline T-hooks are fully metal constructed whereas a few models have a plastic handle.

How To Use A Trampoline Spring Tool

Before knowing the trampoline spring tool-using process, you should know the basic design of a trampoline spring. This will ease the spring removal process. Trampoline springs consist of two ends- one is the open end that is attached to the frame and another is the closed end that is clung to the V-rings of the mat.

Spring pullers are used for trampoline spring installation, removal, and replacement of the springs purposes. Let’s know how to use a spring puller to attach, detach, and replace springs.

Springs Attaching

After buying a new trampoline when you are going to put together all the parts, a spring puller will be handy to attach springs with the mat and frame. Insert the closed end of the spring with the v-rings of the mat and pull the open end of the spring using the spring hook tool to attach it to the frame.

Detaching Springs

Choose the springs first that you want to remove. When removing the springs, hook the spring removal tool on the mat end (open end) of the spring and pull it towards the body until it is detached from the mat. Now detach all the springs that you want to remove to disassemble the trampoline.

Replacing Springs

Replacing consists of two processes- detaching and attaching the springs. Use the technique discussed above to attach and detach the springs.

Video on how to use the trampoline spring tool:

[wpsm_video]https://youtu.be/3jorE3Thoek[/wpsm_video]

Recommended Trampoline Spring Pull Tool

After getting ideas on spring tool use, let’s reveal some of the best trampoline spring tools.

1. SANJOIN Trampoline Spring Pull Tool (t-hook)

It is a good choice to attach and detach springs. The handle of the SANJOIN spring T-hook is ergonomically made with plastic for a comfortable and firm grip. The length of the T-hook is large (4.5 inches) which allows for exerting good pressure on springs.

2. TecUnite 2-Pack Trampoline Spring Pull Tool

One pack of TecUnite includes 2 spring tools for attaching or detaching the springs. It is 5.1 inches in length for pulling the springs without any hand injury. The plastic handle provides good room for gripping and exerting pressure on springs. It is very affordable among the available options.

3. TTSAM Trampoline Spring Puller

The 5.2 inches long and 4.5 inches handle-length trampoline spring tool by TTSAM is another good option for spring removal. The handle is plastic and made for good hand comfort. It works for any size and type of spring assembly and disassembly.

4. SkyBound Spring Tool With Universal Replacement Springs

If you want to buy springs with a spring puller, the Skybound set will be an ideal option. Each package comes with a durable full-body metal spring tool. Available packages come with dissimilar springs number such as 12, 16, 24, 36, and 48. Springs sizes vary from 3.5 to 8.5 inches to fit with any trampoline.

5. JumpKing Spring Pulling Tool

JumpKing introduces this metal spring puller to insert or remove springs from trampolines or any other equipment where spring assembly and disassembly are important.

Can I Make A Trampoline Spring Tool

Yes, you can. If you don’t want to buy a trampoline spring tool or want to make the tool on your own believe me you can do it easily. This task will level up your DIY skill as well as ensure plenty of fun. So, how to make a trampoline spring tool?

To complete the project the things you’ll need are a long nail wooden piece, pliers, a hammer, a drill, etc. The wood will act as the handle. Considering nail diameter, make a hole in the center of the wood using the drill.

After that insert the nail into the wood, if necessary, use a hammer to pin the nail. Now make an L-shaped puller in the open end of the nail. Then test the spring puller how it is working.

When choosing the wood be sure, it is plain and free from choking hazards. And nail length should be more than 4 or 5 inches.

Trampoline Spring Tool Alternatives

There are several tools that you can use as spring tool alternatives such as a screwdriver, pliers, and a Caulking gun.

Screwdriver

This is a good tool to remove springs first. But be careful when you are using the screwdriver to detach the springs. Grab the screwdriver and go into the spring hook of the frame end. Lead the screwdriver in the open end of the spring to take it down. But this process is difficult for the thick springs.

Pliers

It is another tool for spring removal. But special care should be taken in this case too. As pliers may slip or can damage the springs severely. So, hand gloves might help you keep your hands protected. To detach any spring, hold the mat end of the spring using pliers and exert pressure to detach it.

Caulk Gun

This is a good and quick way to attach or detach springs from the trampoline. After attaching one end of the spring with the V-ring of the mat, hook the Caulking gun with the associated V-ring and squeeze the trigger of the gun until it takes away the other end of the spring from the frame slot.

Trampoline Replacement Springs

The spare trampoline springs are helpful in trampoline repair. Many trampoline manufacturers supply replacement springs for us. They are not very expensive but might turn your old trampoline into a new one with a higher bounce.

Common Replacement Springs Sizes

Trampoline springs are available in several sizes. In general, longer springs tend to have higher bounce. Smaller models are used in mini or small trampolines whereas larger springs are found in bigger products. Some of the common spring sizes are-

• 3.5-inch springs
• 4.75-inch springs
• 5.5-inch springs
• 6.5-inch springs
• 7-inch springs
• 7.5-inch springs
• 8.5-inch springs
• 9-inch springs
• 10-inch springs

Heavy Duty Trampoline Springs

Nowadays some trampolines come with powerful springs. They are durably made to sustain cold, rain, or any harsh weather. These galvanized springs can resist cracking and last longer without any damage. If you want to make your trampoline more bouncy and strong, you can use these springs.

Relation Between Trampoline Size and Springs Size

Both the spring size and thickness of a trampoline rise with trampoline sizes. For example, the 12 ft trampolines opt 72 to 84 springs, each of which is 6.5 to 7.5 inches long. On the other hand, 14 ft trampolines use 84 to 96 springs 7 to 7.5 inches long. And there are 7 to 8.5 inches of 96 to 108 springs in 15 ft trampolines.

There are other comparative features between 12ft, 14ft, and 15ft trampolines too.

Where Can I Find Trampoline Springs For Sale?

When spring replacement is necessary, you might wonder who supplies replacement springs. Luckily there are several manufacturers who do that. You can buy them at a cheap price. From any street shop or online shop (like playing online trampoline games you can easily pick the right model. However, Amazon might bring a huge collection for you.

Trampoline Spring Replacing Questions

Does the Skywalker trampoline come with a spring tool?

Yes, Skywalker trampolines include a spring tool kit in the package. Moreover, you can also buy it separately. the best place to buy a trampoline is Amazon.

Can I set up a trampoline without a spring tool?

Yes, you can install trampoline springs using your hand power without any spring tool help. But it’s time-consuming and sometimes dangerous. So, the spring tool is highly recommended.

Conclusion

The trampoline spring tool and its alternatives are good to have if you want a safe and effective trampoline spring attachment and removal. When spring replacement is needed, choose the durable and weatherproof springs. And when going for the replacement use hand gloves for hand safety.

Hopefully, you got the answer to what you are searching to know about spring tools and trampoline spring tool alternatives. Now, it’s time to install the replacement springs!

Video on how to replace trampoline springs:

[wpsm_video]https://youtu.be/UcFKWH-ZliQ[/wpsm_video]